Descargar Imprimir esta página

Information About The Documentation; About This Documentation; Explanation Of Signs Used; Symbols On The Product - Hilti DD 350 Manual Del Usuario

Ocultar thumbs Ver también para DD 350:

Publicidad

Idiomas disponibles

Idiomas disponibles

1 Information about the documentation

1.1 About this documentation

Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
Observe the safety instructions and warnings in this documentation and on the product.
Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.

1.2 Explanation of signs used

1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to serious personal injury or
fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to minor personal
injury or damage to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use
Instructions for use and other useful information
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.

1.3 Symbols on the product

1.3.1 Product-dependent symbols
The following "must do" symbols are used on the product:
Do not transport by crane
Return material for recycling
Alternating current
Service indicator
Rated speed under no load
Diameter
Printed: 18.10.2017 | Doc-Nr: PUB / 5236054 / 000 / 02
English
1

Publicidad

loading