Descargar Imprimir esta página

Manufacturer's Warranty - Hilti DD 350 Manual Del Usuario

Ocultar thumbs Ver también para DD 350:

Publicidad

Idiomas disponibles

Idiomas disponibles

Malfunction
Temperature, overvoltage
or undervoltage indicator is
flashing.
The service indicator blinks.
The motor cuts out.
9 Disposal
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
Drilling and sawing slurry
Disposing of drilling and sawing slurry directly into rivers, lakes or the sewerage system without suitable
pretreatment is problematic from an environmental point of view.
▶ Ask the local public authorities for information about current regulations.
We recommend the following pretreatment:
▶ Collect the drilling or sawing slurry (for example, using a wet-type vacuum cleaner).
▶ Allow the drilling or sawing slurry to stand for some time or add a flocculation agent to help the fine
particles in the slurry settle and separate from the water.
▶ Dispose of this solid portion of the drilling or sawing slurry at a construction waste disposal location.
▶ Neutralize the remaining water from the drilling or sawing slurry (alkaline, pH-value > 7) by adding an
acidic neutralizing agent or dilute it by adding a large quantity of water before allowing it to enter the
sewerage system.

10 Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 18.10.2017 | Doc-Nr: PUB / 5236054 / 000 / 02
Possible cause
The automatic drill feed DD-AF CA
emergency stop button has been
pressed.
The diamond core drilling machine
is defective or the safety function
has been activated.
Core bit jammed for too long.
Action to be taken
▶ Release the automatic drill feed
DD-AF CA emergency stop
button.
▶ Switch the diamond core drilling
machine off (press off-switch in
the middle) and back on again.
▶ Free the jam and switch the
motor off and back on again.
English
19

Publicidad

loading