Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
-
U se medium sanding paper (grain 80) for
removing the remaining scratches from the
coarse sanding paper.
-
U se fine sanding paper (grain 120) for
finishing surfaces.
Removing
•
P lace the machine on a table with the mounting
point (3) facing upwards.
•
R emove the sanding paper (10) from the
sanding pad (9).
•
L oosen the Allen screw (7) using the Allen key
(5).
•
R emove the sanding pad (9) from the mounting
point (3).
•
T ighten the Allen screw (7) using the Allen key
(5).
Mounting and removing the saw blade (fig. B)
The saw blade must be used for sawing applications.
Mounting
•
P lace the machine on a table with the mounting
point (3) facing upwards.
•
L oosen the Allen screw (7) using the Allen key
(5).
•
R emove the spacer (8).
•
M ount the saw blade (11) to the mounting point
(3).
•
M ount the spacer (8).
•
T ighten the Allen screw (7) using the Allen key
(5).
Removing
•
P lace the machine on a table with the mounting
point (3) facing upwards.
•
L oosen the Allen screw (7) using the Allen key
(5).
•
R emove the spacer (8).
•
R emove the saw blade (11) from the mounting
point (3).
•
M ount the spacer (8).
•
T ighten the Allen screw (7) using the Allen key
(5).
Mounting and removing the scraping knife
(fig. B)
The scraping knife must be used for scraping
applications.
Mounting
•
P lace the machine on a table with the mounting
point (3) facing upwards.
6
•
L oosen the Allen screw (7) using the Allen key
(5).
•
R emove the spacer (8).
•
M ount the scraping knife (12) to the mounting
point (3).
•
M ount the spacer (8).
•
T ighten the Allen screw (7) using the Allen key
(5).
Removing
•
P lace the machine on a table with the mounting
point (3) facing upwards.
•
L oosen the Allen screw (7) using the Allen key
(5).
•
R emove the spacer (8).
•
R emove the scraping knife (12) from the
mounting point (3).
•
M ount the spacer (8).
•
T ighten the Allen screw (7) using the Allen key
(5).
USE
Switching on and off (fig. A)
•
T o switch on the machine, slide the on/off
switch (1) to the front.
•
T o switch off the machine, slide the on/off
switch (1) to the rear.
Setting the speed (fig. A)
The speed adjustment wheel is used for setting
the speed. The speed adjustment wheel can be
set to 6 positions.
The ideal speed depends on the application and
on the material to be worked.
Do not set the speed during use.
•
T urn the speed adjustment wheel (2) to the
required position.
Hints for optimum use
•
C lamp the workpiece. Use a clamping device
for small workpieces.
•
D raw a line to define the direction in which to
guide the accessory.
•
F irmly hold the machine by the grip.
•
S witch on the machine.
•
W ait until the machine has reached full speed.
•
P lace the accessory on the workpiece.
•
S lowly move the machine along the pre-drawn
line, firmly pressing the accessory against the
workpiece.
Publicidad
Tabla de contenido
