Nice Peccinin Manual Del Usuario página 18

• Position the lock on the mounting base taking care
to not crush the wires, slide back and secure the two
screws that come with the kit.
• Position the guide ramp of the pin and weld it.
• Test the set operation a few times.
CONNECTION AND CONFIGURATION WITH
ELECTRONIC CONTROL UNITS
ATTENTION!
The electromagnetic lock must be connected to
the auxiliary "NO" relay contained in the electronic
control unit, connecting the lock directly to the
motor can damage the product and implies loss
of warranty. It is advisable to read the instruction
manual of the installed electronic control unit.
18 Electromagnetic lock for automatic gates