Using Your Machine - Hoover Expert Serie Manual Del Usuario

Tabla de contenido

Publicidad

Using your machine

• The steam cleaner and accessories get very hot during use, always allow them
to cool down before handling.
• Always unplug and switch off the steam cleaner when assembling.
• Always switch off the steam cleaner before emptying the water tank or
changing the cleaning pads/accessories.
• IMPORTANT: Please refer to floor manufacturer's care recommendations before
use and test the steam cleaner on a discrete area of flooring to begin with.
• When using steam cleaner, basic safety precautions should always be observed.
• Don't aim the steam cleaner at people, animals, plants or electrical components
such as interior of ovens or wires. Never touch the steam spray or floor head
from a short distance. (There is a risk of scalding)
• The steam cleaner is equipped with a thermostat and a thermal cut out.
If for any reason the steam cleaner overheats it will switch off. If this happens
turn off and unplug the steam cleaner, allow to cool for a least 2 to 4 hours and
re-start.
9
WARNING:
Never leave the Steam Cleaner in one
spot on any surface for an extended period of time with
a damp or wet Microfiber pad attached as this may
damage the floor surface.
When cleaning hard floors, your Steam Cleaner should
only be used on tiles, linoleum, sealed hardwood
flooring, laminate, vinyl and sealed stone floors.
on waxed flooring, you may experience loss of
glossiness.
To reduce the risk of personal injury, unplug the steam
cleaner when assembling the accessories.
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam Trigger
without water in the water tank.
IMPORTANT:
Never use the Steam Cleaner
without the Microfiber pad properly attached to the
Floor Head.
If used

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wh20540cdi

Tabla de contenido