Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EDG-4W KEY FEATURES:
• Distance Measurement A: Nominal peak steady state intensity of
1,300 - 1,400 µW/cm
a minimum UV-A intensity of 200 µW/cm
• Distance Measurement B: Nominal peak steady state intensity of
630-670 µW/cm
minimum UV-A intensity of 200 µW/cm
• Distance
340-380 µW/cm
minimum UV-A intensity of 200µ W/cm
• Less than 1.0 foot-candle (11 lux) visible light emission.
• Long-lasting UV-A Lenses.
• Cool running, fanless design.
• Adjustable mounting bracket.
• IP65 Rated: The EDGE™ Series lamps are protected from total dust ingress
and from low pressure jets of water (from all directions). For more details,
consult EN 60529 (British BS EN 60529:1992, European IEC 60509:1989).
• The EDGE™ Series is CE, CCC, RoHS, and WEEE compliant.
Meets EN ISO 3059 standard on UV-A output for the removal of excess
penetrant for non-destructive testing.
FIRST USE
• The EDGE™ (EDG-4W) UV-A LED flood lamp is shipped factory set at the
specified intensity for optimal performance during inspections.
• Carefully unpack and inspect the lamp for possible damage during shipment.
If any damage is noted, immediately notify the carrier and supplier before
attempting to use the lamp.
• Make tests in a darkened area for best fluorescent response.
• Instant-on operation ensures that each of the UV-A LEDs reaches full intensity
very quickly. Check to see if the unit is operating optimally.
UV emitted from this product. Avoid eye and skin exposure to unshielded products.
at 48 inches. Large coverage area 22 x 22 inches with
2
at 72 inches. Large coverage area of 24 x 24 inches with a
2
Measurement
at 96 inches. Large coverage area of 25 x 25 inches with a
2
FOR PROFESSIONAL EXAMINATION USE ONLY
.
2
.
2
C:
Nominal
.
2
WARNING
2
steady
state
intensity
of
Publicidad
Tabla de contenido
