Installation; Television Location; Optional Cable Connections; Ac Power Supply Cord - Panasonic PT-47WX42 Instrucciones De Operación

Tabla de contenido

Publicidad

I
NSTALLATION

Installation

Television Location

This unit can be used as an entertainment center. Consult your dealer for available options.
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
Fluorescent lighting may reduce remote control transmitting range.
Keep away from magnetic equipment, including motors, fans and external speakers.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors, that match your component connectors.
Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT
PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANT1 connection on back of television. Select cable
mode and ANT1 in SET UP menu under Prog Chan (Program Channels).
Note:
A cable converter box may be required for proper reception. Check with your local cable company for
compatibility requirements.
Antenna Connections
For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is
recommended.
Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the
SET UP menu under Prog Chan.
4
Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT 1 in the Set Up menu.
Polarized plug
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of PTV
Incoming Cable from
Home Antenna

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Pt-47wx52Pt-53wx42Pt-53wx52Pt-56wx42Pt-56wx52Pt47wx42f

Tabla de contenido