Importing Data Via Usb Port; Service Options - Clarion NAX983HD Guía De Usuario

Importing Data via USB Port

Touching the [Import Data] key from the Settings menu displays the Import Data menu screen.
You can import the downloaded data from the Clarion homepage (http://www.clarion-eu.com/) into the
hard disk drive through the USB memory stick.
When you perform the operation of data import, confirm that the USB memory stick on which the relevant
data is stored has been connected to the USB port.
To use the USB memory
1. Connect the connector of the USB memory
stick to the USB port of the main unit after
removing the cover of the USB memory and
making sure the orientation of the terminal is
correct.
Insert it surely until it stops.
CAUTION
CAUTION
Data may be broken when using USB
memories sticks in the following situation:
When disconnecting the USB memory stick
or turning the power off during writing or
reading data.
When affected by static electricity or electric
noises.
It is recommended that you back up your
important data to a personal computer by
using the USB memory stick.

Service Options

Touching the [Service Option] key in the Setting menu displays the Service Option menu screen. You
can perform the operation such as displaying a demonstration of the navigation system, backup or
restore of stored data, and resetting to the factory settings.
Demonstration
Displays the demonstration of the route
guidance.
"Demo" :
Touch the [Select] key, then touch the desired
demonstration course to play.
Wallpaper
You can import wallpaper data stored in the USB
memory stick into the hard disk drive. Touch the
[Import] key of the "Wallpaper", and operate
according to the displayed messages. You can
delete the data imported to the hard disk drive by
touching the [Delete] key.
Safety Camera
You can import the location database of Safety
Cameras stored in the USB memory stick to the
hard disk drive. Touch the [Import] key of
"Safety Camera", and operate according to the
displayed messages. You can delete the data
imported to the hard disk drive by touching the
[Delete] key.
Note:
• This function displays the locations of Safety
Cameras on the map using the imported location
database of the Safety Camera on the hard disk
drive, and warns that the vehicle approaches the
location. For details, see the Clarion's homepage.
• Be sure to import the location database of Safety
Cameras when the vehicle is stopped. The
message saying "Reading" disappears when the
import is finished. If the vehicle starts to move
before the message saying "Reading" disappears,
the import will be cancelled.
53
NAX983HD