Cooper Tools Wire-Wrap 14YB3 Instrucciones Para El Manejo página 11

6. Do not overload the electric tool.
Always work within the specified performance range.
7. Always use the correct electric tool.
The wire-wrap tool should only be used to produce wire-wrap connections within the specified
application range.
8. Wear suitable work clothes.
9. Never use cables for purposes for which they were not intended.
Never carry electric tools by their cable. Never pull the cable to disconnect the plug from the
mains socket. Protect the cable from heat, oil and sharp edges.
10. Avoid abnormal positions of the body.
Ensure that you hav a firm stand and that you can keep your balance at all times.
11. Maintain electric tools with the utmost care.
Replace spent wrap bits and wrap sleeves. Observe the safety instructions and warnings
when changing tools. Check the cable of the electric tool regularly and have it immediately
replaced by an authorized specialist if it is found to be damaged. Extension cables must also
be regularly inspected for damage. Handles must always be kept dry and free of oil and
grease.
12. Always disconnect the plug from the mains socket when the electric tool
is not being used and prior to maintenance work or tool changing.
13. Prevent accidental starting.
Electric tools that are connected to the power supply must never be carried with the finger
on the switch.
14. Using extension cables outdoors:
Only use extension cables that have been specifically approved for outdoor use and are
identified accordingly.
15. Always concentrate on you work and pay attention to what you are doing.
Do not allow yourself to be distracted. Adopt a common sense approach to your work. Never
use the electric tool if you cannot concentrate.
14YB3_09._00 10
16. Carefully examine the electric tool for possible damage.
Check the perfect and proper performance of the electric tool prior to its use. Damaged parts
and switches must be replaced by an authorized servicing workshop. Never use an electric
tool that cannot be properly turned on and off by its switch.
17. Warning!
Only use the accessories listed in the operating instructions. The use of other accessories
can only result in the risk of injury.
18. This electric tool conforms with the requisite safety regulations.
Repairs must only be completed by authorized electrical specialists. Only use original spare
parts, otherwise the risk of accidents for the user will be greatly increased.
22.05.2003, 11:21 Uhr
10