Power Source Requirements; Operating Environment - GreenWorks Tools IV40A00 Manual Del Operador

IMPORTANT SAFETY INSTRUCTIONS

POWER SOURCE REQUIREMENTS

The power source must able to supply the necessary current to operate the load. The
GreenWorks 29462, 29472, 2909202, 2901319 model battery pack is the only DC source, cannot
connect to other DC source.
W A R N I N G :
Keep ventilation when using batteries.
Cannot mount the power inverter on other position, can just install on the GreenWorks battery pack.
CONNECTION TO LOAD
The inverter is equipped with Type A and Type B AC power receptacle. Plug the cord from the
equipment you wish to operate into the AC receptacle. The green LED indicator lights to indicate
that the inverter is functioning. Make sure the combined load requirement of your equipment
does not exceed inverter's output rating.
The inverter is engineered to be connected directly to standard electrical and electronic
equipment in the manner described above.
Do not connect the power inverter to household or RV AC distribution wiring.
Do not connect the power inverter to any AC load circuit in which the neutral conductor is
connected to ground (earth) or to the negative of the DC (battery) source.

OPERATING ENVIRONMENT

criteria:
DRY- Do not allow water and/or other liquids to come into contact with the power inverter.
COOL – Do not place the inverter on or near a heating vent or any piece of equipment which is
generating heat above room temperature. Keep the inverter away from direct sunlight, if at all
possible.
SAFE –
4