Preparation; Connections; Connecting Audio Devices - Yamaha R-N303 Manual De Instrucciones

PREPARATION

Connecting audio devices

Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty, no sound will
be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and
lack bass. Refer to the owner's manual for each of your components.
Make sure to use RCA cables to connect audio components.
CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.
CD player, etc.
Audio output
C
(digital coaxial)
NETWORK
DIGITAL
OPTICAL
COAXIAL
Audio
GND
output
Turntable
Note
The input jacks are different on the R-N303 Europe model and on the R-N303D (p. 7).
Only PCM signals can be input to the digital (OPTICAL/COAXIAL) jacks of this unit.
10
En

Connections

DVD player, etc.
Audio output
O
(digital optical)
SERVICE
FM
75
PHONO
GND
Audio
output
CD player
CD recorder, etc.
Audio Audio
output input
ANTENNA
AM
CD LINE
IN OUT
2
Speakers A
(R-N303 except Europe model)
SPEAKERS
A OR B:8ΩMIN./SPEAKER
A
CLASS 2 WIRING
CABLAGE CLASSE 2
B
Speakers B