Display Indicators; Description-Rear Panel - Samsung DVD-E137A Manual De Instrucciones

Display Indicators

1
2
Front Panel Display
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
10
3
ENG
DVD-E537
1 2 3 4 5
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
4. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6. VIDEO OUT SELECT SWITCH
• Use this switch to set video out. If Scart jack is selected, S-Video may not work.
If S-Video is selected, Scart jack may not work.
7. SCART AV1 JACK
• Connect to a TV with scart input jack.
8. SCART AV2 JACK
• Connect to a video recorder or other equipment.
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
ENG

Description-Rear Panel

S-VIDEO
VIDEO OUT
SELECT
SCART
6 7 8
11