Publicidad
Idiomas disponibles
Idiomas disponibles
CSA 20L 115
B3
B4
Before Use
Attach auxiliary handle (B1)
For reasons of safety the auxiliary handle must be assembled when you use the tool
1. Screw the auxiliary handle in one of the attachment point on the tool head.
2. Make sure the handle is securely fastened.
Adjust Grinding guard (B2)
1. Loosen the screw on the guard with a suitable screwdriver. Do not wind out completely.
2. Adjust the guard to a position that protects you from flying sparks.
3. Fasten the screw.
Install/Remove Grinding Disc (B2-B3)
Install
1. Make sure the guard is securely in place.
2. Place the inner flange on the spindle. Ensure it is aligned on the two flats.
3. Check the rated speed on the grinding disc. Do not use a disc with a rated speed lower than the
speed shown on the tool label.
4. Fit the disc onto the spindle over the inner flange.
5. Press the spindle lock button to prevent movement of the spindle.
6. Keep the lock button pressed in and tighten the threaded outer flange by turning the lock nut
wrench.
14
Publicidad
