Publicidad
Idiomas disponibles
Idiomas disponibles
CSA 20L 115
Remove
1. Press the spindle lock button.
2. Loosen the spindle lock nut by turning the nut counterclockwise with the wrench.
3. Remove the threaded outer flange.
4. Remove the grinding disc from the spindle.
Operation (B4)
Switch
Grinding
1. Grip the grinder securely with two hands so you have full control at all times. The starting torque
creates a sudden jerk.
2. After starting the tool, apply the grinding wheel to the workpiece.
Note: Do not turn the switch on or off while the grinder is in contract with the workpiece. It will
decrease switch life and could cause damage to the workpiece.
3. Tilt the grinder at a 10° to 15° angle for easy handing and smooth grinding.
4. Apply the grinding disc to the work surface with a light, steady pressure for maximum grinding
efficiency. It should never be necessary to force the tool. The weight of the tool applies adequate
pressure.
5. The grinding discs are more moderate metal removal on flat or contoured surface. Do not
putexcessive pressure on the grinding disc. Excessive or sudden pressure will overload the motor,
slow the grinding action, put dangerous stress on the disc and causes breakage.
Note: The continued use of a worn-out disc may result in disc explosion and serious injury.
1. To turn the grinder on, press down the switch lock of 1
2. Press down the switch 2
15
Publicidad
