Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Removing the battery pack
Charging the battery
Installing the battery pack
Mounting and Removing the
Blade
NOTE: Lock or loose the blade
bolt, the spindle lock button
should be pressed.
WARNING: Always
remove the battery
before changing the blade!
Safety switch and On/Off
trigger
WARNING: To avoid
cutting injury from the
sharp blade, please don't put
your hands around the Base
Plate.
NOTE: Keep the dust
adapter connected to dust
collecting device when using
the tool.
Rip and Cross Cutting
NOTE: The cutting line of
saw blade is aligned with the
cutting mark 0°.
Parallel Guide
Adjusting the Cutting Depth
Adjusting the Cutting Angle
NOTE: The cutting line of
saw blade is aligned with the
cutting mark 45°.
Pocket /Plunge
Sawdust Removal
WORKING HINTS FOR YOUR
TOOL
Your power tool shall not be used for cutting
plastics. The blade may become very hot after
prolonged usage, please do not touch it.
20V Cordless Brushless Circular saw
FIGURE
See Fig. A1
See Fig. A2
See Fig. A3
See Fig. B
See Fig. C
See Fig. D1, D2
See Fig. E1, E2
See Fig. F1, F2
See Fig. G
See Fig. H1, H2
See Fig. I
MAINTAIN TOOLS WITH
CARE
Remove the battery before carrying out any
adjustment, servicing or maintenance.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorized service
facility. Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use water
or chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust.
Periodically clear dust and chips from guard and
base to ensure proper performance.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
The recommended ambient temperature range for
the charging system during charging is 0
C-45
C.
o
o
C-40
C.
o
o
EN
17
Publicidad
Tabla de contenido
Solución de problemas
