Phil & Teds alpha Manual Del Usuario página 23

INSTALLATION IN THE VEHICLE WITH BASE
7a Place the base onto the vehicle seat.
Pull out the support leg under the base, put the base flatly
on the vehicle seat. Push the base to the back of vehicle
7a
seat with anti-rebound bar against the back of vehicle seat.
7b Pull vehicle belt through slot on either side of base.
7c Unlock the lock-off on base, put vehicle belt through
lock-off and belt slot on the other side, then lock the lock-off.
When you hear a "click" , that means the lock-off is
well locked.
7b
Smooth out and fasten vehicle belt.
Adjust the length of support leg, make sure support leg
touching vehicle floor firmly.
7c
Instructions