Blade Maintenance - Martha Stewart MTS-CGSH1 Manual Del Operador

Maintenance
m
WARNING!
Always switch the product off and let the
product cool down before performing inspection, maintenance
and cleaning work.
1. Keep the ventilation vents of the tool clean at all times. If
possible, prevent foreign matter from entering the vents.
2. If the enclosure of the trimmer requires cleaning, do not
use solvents to clean it. Only use a moistened soft cloth.
Never let any liquid get inside the tool; and never immerse
any part of the tool into a liquid.
3. The blade rail should be cleaned and treated with light
machine oil or spray lubricant (such as WD40, CRC 5.56
or RP7) after each use. When a job lasts for a long period
of time, it is recommended that the blade rail also be
treated with spray lubricant at regular intervals during
operation.
4. Inspect the product before each use for worn and
damaged parts. Do not operate it if you find broken and
worn parts.

Blade Maintenance

To ensure years of efficient and trouble-free operation, blade
cleaning should be performed if sap and debris have built-
up, or if you live in an area where the soil is sandy. Cleaning
unusually heavy deposits may require removal of the blades.
NOTE: Snow Joe + Sun Joe
®
any damage or injuries caused by repair of the trimmer by an
unauthorized person or by mishandling of the trimmer.
1. Keep the cutting blades clean and free of debris. Remove
trimmings.
2. Apply a small amount of suitable lubricant on the blades
to retain a good cutting performance (Fig. 13).
Fig. 13
will not be held responsible for
®
3. Keep the blades sharp. Have a worn or damaged cutting
device replaced with a new one of the same type by a qualified
specialist. Spare parts may be ordered online at snowjoe.
com or via phone by contacting the Snow Joe
customer service center at 1-866-SNOWJOE (1-866-766-9563).
Storage
When the tool will not be used for several months, it is ideal
to leave the battery connected to the charger. For optimal
storage, proceed as follows:
• Fully charge the battery.
• Clean the product as describe above.
• Assemble the blade covers over the blades (Fig. 14).
Fig. 14
• Store the tool in a secure and dry location. The storage
temperature must always remains in the range of
41°F (5°C) to 104°F (40°C).
• Before using the tool after prolonged storage, fully
recharge the battery.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover
the terminals to prevent the battery pack from shorting, which
could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead, or completely discharged. When burned, toxic fumes
and materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specific information.
10
+ Sun Joe
® ®