Learning More About Your Lumea Series 9000; Charging; Charging The Device; Attachments - Philips Lumea 9000 Serie Manual Del Usuario

B C D
E

Learning more about your Lumea Series 9000

Charging

Charging the device

Attachments

6 Clean all surfaces of the attachment, including the metal reflector and
window of the attachment (parts B, C, D, E).
7 Let all parts dry thoroughly.
8 Store in a dust-free place at room temperature.
Fully charge the batteries before you use the device for the first time and
when they are empty. Charging the batteries takes up to 1 hour and 40
minutes. Charge the device when the charging light lights up orange during
use to indicate that the battery is low and will run out soon.
Fully charged batteries provide at least 130 flashes at light intensity 5.
1 Turn off the device.
2 Insert the small plug into the device and the adapter in to the power
outlet.
-
During charging, the charging light flashes white.
-
When the batteries are fully charged, the charging light lights up
white continuously.
-
Never cover the adapter and device during charging.
Note: The adapter and device can feel warm during charging. This is
normal.
Note: This device is equipped with battery-overheat protection and
does not charge if the room temperature exceeds 40 °C.
3 After charging, remove the adapter from the power outlet and pull the
small plug out of the device.
Tip: Charge the device after each use to save battery life.
For optimal results, it is important to use the correct attachment intended
for the specific body area you want to treat. Lumea Series 9000 offers
full‑body treatment with several attachments designed for use on specific
body areas. SenseIQ technology adapts the treatment program when a
different attachment is connected.
Note: The device may not work anymore and show an error when there is
dirt on the attachment connector. Clean the contact leads when this
occurs.
21
English