VATECH EzRay Air Wall VEX-S300W Manual Del Usario página 24

3. Operation
3. After tooth type selection, patient type should be selected. When the Adult/Child
selection area flickers, turn the jog dial to select the patient type. To see the Control
Panel after selection, refer to the figure below.
4. If you want to change the exposure time, turn the jog dial to adjust the exposure time
from 0.05 to 0.5 s. (increments: 0.01 s)
16
After patient type selection
Patient Type
Symbol
After the tooth type and patient type are selected, exposure time is
automatically displayed.
If you press the jog dial after adjusting the exposure time in Manual
Mode, the exposure time is returned to the default setting.
To save the exposure time as default in Manual Mode, press and hold
the jog dial for about 3 seconds.
Type
Adult
Child
EzRay Air Wall (VEX-S300W) User Manual