Connecting An Already-Paired Component Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha MCR-B043 Manual De Instrucciones

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Connecting an already-paired component via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
1 5 : 3 0
1 5 : 3 0
B T _ _ _ _ _
Connecting from the other component
1
In the Bluetooth settings of the other component, turn Bluetooth on.
2
From the Bluetooth connection list of the other component, choose this unit (MCR-B043 Yamaha).
The Bluetooth connection will be established, and the front panel display of this unit will indicate the name of the other
component.
Bluetooth connections cannot be established from the other component when this unit is in ECO standby (+ P. 5).

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Switch the audio source other than Bluetooth.
• Turn the unit off.
• Turn off the Bluetooth setting of the other component.
10
En
Press the source button to switch the audio
source to Bluetooth.
The Bluetooth indicator will blink in the front panel display;
this unit will search for the other component that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of
the other component).
When the Bluetooth connection has been established, the
Bluetooth indicator will light, and the name of the other
component will be displayed.