Operator Interface; Operator Panel; Initial Settings - Indel B SAFE 10 E PLUS SMART Instrucciones Para El Uso

SAFE 10 E PLUS SMART

OPERATOR INTERFACE

DS9490R
is the default setting

INITIAL SETTINGS

After launching the program, select in the operator panel the type of interface used.
The keys called Holders, Audit Trail, Clock Adjustment, Excel, Print, Close, serve respectively to rename
the electronic key (Holders), read information (audit trail), set date and time (Clock Adjustment), save data
downloaded in Excel format (Excel), to print the stored data (Print), and close the program (Close).
SAFE DATE AND TIME SETTING
Before using the program, it is necessary to set correct date and time in the Safe. The date that will be stored by
the time card is the date and time set in the computer. For this operation it is necessary to proceed as follows.
Connect the time card (green) to one of the two encoder ports and click on the Clock Adjustment button in
the operator panel.
SAFE 10 E PLUS SMART_IM_20190905

OPERATOR PANEL

Time card (green)
Encoder
32