Using Your Appliance - Hisense HBC54D6AS Manual Del Usuario

Using your appliance

This section tells you how to use most of the useful features. We recommend that you read through them
carefully before using the appliance.
Installation The Handle
The tools you will need：
Philips Screwdriver
(Not provided)
The parts you will need：
Handle (Provided)
1
Before using the device, install the handle as follows:
1.First open the door and take the door gasket out
on one side of the nonhinged side.
2.Find the handle and screws in the accessory
pack.
3.Attach the screw with a magnetic screwdriver so
that it passes through the screw hole in the door
body until the bottom. Keep a certain amount of
pressure and don' t let go.
4.One hand holds the handle so that the handle
hole is aligned with the screw, and the other hand
turns the screwdriver.
5.Install another screw in the same way.
Screw (Provided)
2
door
gasket
screw
handle
Placement Of Cans
The appliance is equipped with 3 shelves with 42 slots
each. The cans should be placed on the shelves as
shown below.
You can also place cans in the bottom of the cabinet.
WARNING
•To prevent the cans from rolling down and
being broken, there should not be more
than 14 cans placed at the bottom of the
refrigerate room as showed above.
•The maximum loading of each type of
shelf is 33lb.
10