Error Codes - Midea MRB19B7AWW Manual De Usuario

PROBLEM POSSIBLE CAUSE
The room temperature is
The
hotter than normal.
compressor
turns on and
A large amount of food
off frequently.
was recently added.
The door is not closed
completely or was opened
too often.
The refrigerator has been
disconnected for a period
of time.
The temperature control
was not set correctly.
Refrigerator needs
Refrigerator
cleaning.
has an odor
Improperly wrapped food

ERROR CODES

Fault Code
LED 1 indicator and LED 2 indicator
LED 1 indicator and LED 5 indicator
LED 1 indicator and LED 3 indicator
LED 2 indicator and LED 4 indicator
LED 1 indicator and LED 4 Ambient
SOLUTION
This is normal.
Allow time for the recently
added food to cool, and
then check again.
Check the door gasket and
food distribution to make
sure the door will close
completely.
Allow 4 hours for the
refrigerator to cool
completely before adding
food.
Set the temperature
control to the correct
setting.
Clean the refrigerator. See,
"Cleaning."
Wrap food tightly or seal
r. before storing it in the
refrigerator.
Fault Description
Refrigerator temperature sensor
fault
Freezer temperature sensor fault
Freezer defrost sensor fault
Communication fault
Ambient temperature sensor fault
21