EAS ELECTRIC EDHP96 Manual De Instalación página 70

following situations:
1) If there are one or more air conditioners is under ON state (include timing process of timing ON and OFF), "
" key only short press effective.
Only sends the shutdown order to the air conditioner which under the ON state, and if the unit is under the
OFF state, the controller will not send OFF order to it.
The memory function is activated; the current state of all air conditioners is memorized.
2) All the air conditioners in the centralized controller network are OFF states.
① Short press "
" key
The centralized controller reads the memory contents, and sends relative order to all air conditioners.
② Long press "
" key
a) If current page is setting parameters, and the setting mode is not OFF, the centralized controller will send
orders to all air conditioners according to parameters, such as setting mode, fan speed, setting temperature,
etc.
b) If the current is under setting interface but the setting mode is OFF state or under other interfaces, the
centralized controller will send the default ON order to all air conditioners. The default ON order is: cooling
mode, high fan speed, setting temperature is 24℃ or 76℉, operates the swinging function.
※ Air filter cleaning remind display description
1) The centralized controller records the total running time of the indoor unit.
When the accumulated running time reaches the pre-set value, the reminding dual "88" (as show in c part of
the Fig. A) will display "FL" to remind users that the air filter of the indoor unit need to be cleaned.
When the centralized controller displays FL, it needs to manual operation to clear the icon. Press SWING key
and hold on then press QUERY key "
At the same time, the accumulated time of centralized controller powered on will be cleared.
2) Function setting
① Dial the dial code 3 to "ON" ( refer to table 2.3 ), and when controller power on within 1 minute, press
QUERY key and FAN key together will enter the optional function setting page. The icon
part of the Fig. A) will be flashed with 1Hz frequency (default display 00), and users can choose the
", can clear FL reminding.
Fig. A
70
(as show in b