Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the agitator to check for string and
hair build-up.
NOTE: In order to keep cleaning
efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned
every
time the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use
HEAVY
-
(used daily)
MODERATE
-
(used 2-3 times/week)
LIGHT -
(used 1time/week)
Clean Agitator
every week
every month
every 2 months
Cap
Cut off any carpet
pile, hair or lint
entangled
around
the agitator and
remove any string
or debris located
near the end
caps.
TO REPLACE BELT
Sha_
Belt
Belt
Pulley
Seat left end of agitator into nozzle base. To
seat agitator end, place rounded portion of agi-
tator end cap down into slot in nozzle base.
Loop the new belt on the motor shaft.
NOTE: Use Belt #20-5275
Loop the other end of belt onto the belt
pulley on the right end of agitator.
Pull right end of agitator forward and seat it
into nozzle base
Cap
Slot
Agitator
Nozzle
Base
Press firmly, checking to see that each end
is completely
inserted.
Belt
Agitator
Check to see that the belt is centered on the
belt pulley and that the agitator turns freely.
Nozzle
Cover
\
Nozzle Cover
Retainers
Make sure the nozzle cover retainers are in
the UNLOCK position.
Hook the front of the
nozzle cover on to the nozzle base and
rotate downward.
Once in place, rotate the
nozzle cover retainers to the LOCK position.
16
Publicidad
