Publicidad
Idiomas disponibles
Idiomas disponibles
I Please pay special attention to these hazard alert boxes, and follow any instructions given.
WARNING statements alert you to such hazards as fire, electric shock, burns and personal
injury. CAUTION statements alert you to such hazards as personal injury and/or property
damage.
kWARNING
Electrical
Shock Hazard
Do not plug into the electrical
supply
until the assembly
is complete.
Failure
to
do
so
could
result
in electrical
shock or injury,
Before
assembling
vacuum
cleaner,
check
the PACKING
LIST on the cover of the sepa-
rate Repair
Parts List. Use this list to verify
that you have received all the components
of
your new Kenmore
vacuum
cleaner.
HANDLE ASSEMBLY
Remove
the screw located just below
the
top edge of the back of the vacuum
clean-
er. Position
the handle
as shown in the illus-
.__.J /
tration
below.
Handle
_
the opening
:__
_J_lkF
at the top of
_ _1_'/
_..',_.
the vacuum
J _/
_'
HI
cleaner.
1/
Insert the
/11
tl
H, ndl,
screwso,t/ll
LI so, .
passes
Hole
through the handle into the vacuum clean-
er.
kCAUTION
Do not overtighten.
Overtightening
could strip the screw
holes,
Do not operate the vacuum cleaner with-
out the screw in place.
Using a screw-
driver, tighten
the screw.
Begin to tighten the screw with your fin-
gers. It may be necessary
to adjust the
handle slightly.
5
Publicidad
