GB
Fan and motor
Proceed as follows:
•
open the oven door;
•
remove the rack supports
•
unscrew the fan stop nut
To replace the motor, go on with the operations from the left side and the back side:
•
remove rear panel and side panels
•
disconnect motor's power cables
•
unscrew the 3 nuts
•
replace the motor and refit all parts in reverse order
CAUTION!
Do not warp the fan during assembly/dismantling operations.
B
•
(A- Fig.15)
and fan cover-grid
(C-Fig.15)
turning anticlockwise
;
;
(
D-Fig. 15)
supporting the motor and remove the motor;
•
(B- Fig.15)
.
.
A
Fig. 15
C
40
;