Guía De Solución De Problemas - essentiel b EMG3 Instrucciones De Uso

The ice cube tray full
•
indicator light
comes on.
•
•
The water level
•
indicator light
comes on. or
•
•
or
•
The ice cubes produced The water reservoir
are too large or are temperature or room
stuck together. temperature is too low.
The ice cube recovery Power to the appliance
flap is blocked. was cut off during a
cycle and small pieces
of ice formed on the ice
cube recovery flap.
The appliance stops The ice cube tray is
working during incorrectly positioned.
production
24
The ice container is 1. Remove ice cubes.
full. 2. Wipe the LEDs and
The diodes are restart the appliance.
malfunctioning. If the problem persists,
The ice cube recovery contact your retail
flap is blocked. store's customer
service department.
There is not enough 1. Add water up to the
water. maximum level.
2. Press
The pump is If the problem persists,
malfunctioning. drain the water from
The appliance is the tank (refer to
connected to a water "Maintenance and
supply that is turned cleaning").
off. or
Make sure that the hose
The appliance is is properly attached
connected to a and that the water
water supply, but the supply is turned on (see
hose is not properly "Connection to water
attached. supply" section).
Fill the water tank with
water between 8 and
25°C. If the problem
persists, shut off the
appliance and contact
your retail store's
customer service
department.
1. Unplug the
appliance.
2. Push the flap back
slightly and remove the
pieces of ice.
3. You can restart the
appliance.
Remove the ice cubes
and press
problem persists,
contact your retail
store's customer
service department.
Agradecemos su confianza al adquirir un producto de la marca Essentiel b.
Prestamos especial atención a la FIABILIDAD, a la SENCILLEZ DE USO y al
DISEÑO de nuestros productos.
Esperamos que esta máquina de cubitos de hielo sea de su entera
satisfacción.
to restart.
índice
su producto
Contenido del paquete
Descripción del electrodoméstico
Características técnicas
Precauciones
Descripción del panel de control
antes del primer uso
uso
Producción de cubitos de hielo
Desarrollo de un ciclo
Conexión a una entrada de agua
consejos prácticos
mantenimiento y limpieza
Vaciado de la máquina
Limpieza del circuito
. If the
Limpieza de la máquina
En caso de no usar la máquina durante un tiempo prolongado 34
guía de solución de problemas
26
26
26
27
27
28
29
29
30
31
32
32
33
33
33
34
35
25