FONESTAR MAZ-30RGU-E Manual De Instrucciones página 3

8.- REC (MEMORY): button that allows you to record from the AUX/PHONO, MIC 1 and MIC 2 inputs. Siga
Follow the steps below to make recordings:
- Connect a USB device or SD card and press the REC button to start recording.
- The word REC will be shown on the display.
- Press the SD/USB button to select the memory device where you wish to store the recording:
either on the SD memory card or USB storage device.
- Select the desired recording level with the REC LEVEL control.
- Press the REC button again and recording will begin.
- Do not change any settings on the device for the duration of the recording.
- Press 3 to stop recording.
Note: a folder MP3_REC will be created. The recording will be saved as a file in this folder with the
name REC001L (with successive numbering). If Err is shown on the display during recording, it
indicates that an error has occurred. In this case, press 3 to stop recording.
9.- 12: Start and pause playback.
10.- RPT: press this button to select one of the following 4 repeat modes:
- Repeat off (nothing is displayed on the information screen).
- Repeat once (1). Selects repetition of the currently selected audio track.
- Repeat all (ALL). Selects repetition of all audio tracks contained in the SD card or USB storage
device.
- Random order (RANDOM). Selects random playback of all audio tracks contained in the SD card
or USB storage device.
11.- SD/USB: Select the audio source, either an SD card or a USB storage device.
12.- q/3: button to switch on/off the USB/SD/MP3 recorder/player and to pause the recording. Hold
this button down for 3 seconds to turn the power on or off..
2.- MIC 1: Microphone 1 volume control.
3.- MIC 2: Microphone 2 volume control .
4.- AUX/PHONO: volume control of the AUX/PHONO input.
5.- MASTER: control that regulates the general output volume of all inputs.
6.- Amplifier operation indicator light.
7.- Microphone input 1, mono jack 6.3 mm.
8.- Microphone input 2, mono jack 6.3 mm.
9.- BASS: reinforces or attenuates (lowers) bass frequencies ±10 dB.
10.- TREBLE: reinforces or attenuates (lowers) high frequencies ±10 dB.
11.- POWER: amplifier on/off switch.
- 3 -
EN