Maintenance And Service; Transport; Storage; Disposal And Recycling Of Machine - Garland ROLL&COMB 302EUS-V21 Manual De Instrucciones

English

7. MAINTENANCE AND SERVICE

The removal of the security measures, an
inappropriate maintenance, the substitution
of parts by non original spare parts and
accessories could result in severe body harm.
Always carry out maintenance work or servicing
with the machine unplugged from the mains.
Unplug the machine before carrying out any
maintenance work. Read the instruction manual
before carrying out any work.
Carry out periodic checks on the machine
to ensure its correct functioning. For a complete
check up, we recommend you take the machine
to your after sales dealer.
Keep the machine clean, specially the engine air
vents.
7.1. CLEANING
Clean the comber with a damp cloth. Never use
water, petrol or other liquids when cleaning the
machine.
You can use water on the catcher as long as
you separate the catcher from the machine at
a distance from the machine. Dry the catcher
completely before placing again on the machine.
7.2. CONTROL OF THE ELECTRIC CABLE
Inspect the cable for possible damages. If
the cable is not in a good condition, take the
machine to your nearest service agent.
Do not use the machine if the cable is damaged.

8. TRANSPORT

Transport the machine always with the engine
turned off. Before transporting remove switch
from the mains.
The machine can be transported using the
handle. Do not drag the machine with the
comber on the floor.

9. STORAGE

Disconnect the machine from the mains before
storing the machine.
Store electric products such as this machine well
away from children and in a secure manner so
that it does not represent a danger to any person.
The machine should be stored clean and on a flat
surface. Store in a place where the temperature is
not below 0C and not above 45C.

10. DISPOSAL AND RECYCLING OF MACHINE

Destroy or recycle your machine in an ecological
way. We should not throw away the machine
with our domestic rubbish. The machines plastic
and metal parts can be recycled.
Materials used to pack the machine can also be
recycled. Do not throw the boxes away with your
domestic disposals. Dispose of the box in an
appropriate recyclable fashion.
10/52