SteriShoe STSH-002 Manual De Instrucciones página 6

Use the SteriShoe shoe sanitizer
®
only as directed.
To prevent errors when using the SteriShoe® shoe
sanitizer, please follow these directions:
Installing or replacing a lamp
Using a soft dry cloth, hold the front of the UV lamp
and screw it into the socket in the SteriShoe®
ultraviolet shoe sanitizer. Repeat this step for the
second SteriShoe® shoe sanitizer.
General Use Instructions
9
1. Plug the power
supply into a
standard wall outlet
(AC 100-240V).
2. Plug one power cord
into each SteriShoe®
shoe sanitizer.
3. Insert the right
SteriShoe® shoe
sanitizer into a right
shoe and the left
SteriShoe® shoe
sanitizer into a left
shoe.
7. If the on/off button is glowing solid purple, the
SteriShoe® shoe sanitizer is treating the shoe and
will turn off after approximately 45 minutes.
DO NOT remove the shoe bag while the SteriShoe®
shoe sanitizer is treating a shoe.
8. Once the treatment process is complete, the on/off
light will no longer be illuminated and it will be safe
to remove the SteriShoe® shoe sanitizer from a shoe.
If you need to remove a SteriShoe® shoe sanitizer from
a shoe when it is treating a shoe, press the on/off
button to turn it off. If the on/off button is not solidly
illuminated, then it is safe to remove the SteriShoe®
shoe sanitizer as it will not interrupt a treatment.
Note: If the on/off button is flashing, one of the safety
features was probably activated. See the troubleshooting
section (on page 13) for more information.
4. Place each
SteriShoe® shoe
sanitizer and shoe
into the provided
SteriShoe® branded
shoe bag.
5. Close each shoe bag
drawstring.
6. Press each on/off
button to begin
treating your shoes.
10