Mode Selection; Pressure Adjustment - GYS NEOCUT 105 Manual Del Usuario

MAIN SCREEN (CURRENT SETTING):
6.0m
1 3
105
A
5.2 bar
2 4
*An arrow pointing up or down may appear to the right of the pressure when the pressure has been incorrectly altered by the user, the arrow disappears when the set
pressure is optimal or the pressure setting is set in «auto» mode.
TOOLBAR (ACCESS VIA SCROLL WHEEL)
1
2
105A
3
5.2 bar
Setup 4

MODE SELECTION

Cutting

PRESSURE ADJUSTMENT

6.0m
1 3
AUTO
105 A
2 4
105 A
NEOCUT 105 / 125
This screen is displayed as soon as the machine is started:
1- Operating mode
2- Current pressure*
3- Selected torch length
4- Current
The current setting is made directly from this screen.
1- Access to the mode selection screen
2- Access to the main screen (current setting)
3- Accessing the pressure adjustment screen
4- Access to the Setup menu
6 modes are available. To make the right choice, please refer to the chapter «mode selection».
By default, the screen looks like this:
1- Operating mode
2- Current
3- Torch length
4- Pressure*
*Pressure is automatically locked as default (indicated by the inscription AUTO and the closed padlock): the machine
takes care of setting the right pressure value according to various parameters (such as current, mode, torch length).
6.0m
To switch the pressure setting to manual mode, a long press on the scroll wheel
is required: a countdown will start next to the padlock.
3
Releasing the scroll wheel during the countdown cancels the pressure unlocking
AUTO
action.
EN
25