Promaker PRO-H2000 Manual Del Usuario página 12

5. Connect the high-pressure hose to the trigger gun
• Push the high pressure hose into the trigger gun until it locks audibly.
* Make sure the connection nipple is aligned correctly
• Check the secure connection by pulling on the high
pressure hose.
START UP
Park the appliance on an even surface.
Insert the mains plug into the socket.
Water supply
For connection values, see type plate.
ATTENTION
Impurities in the water can damage the high-pressure pump and the
accessories. For protection, the use of the Promaker® water filter is
recommended.
Water supply from mains
Illustration
• Connect the other end of the high-pressure hose to the water outlet
on the washer and twist the black rotatable end-piece.
12