Finish Operation - Promaker PRO-H2000 Manual Del Usuario

Finish operation

• Release the lever of the trigger gun.
• Turn off the appliance " OFF/ON".
• Disconnect the mains plug from the socket.
Only separate the high-pressure hose from the trigger gun or the
device when there is no pressure in the system.
TURN OFF TAP
• Pressure the lever of the trigger gun to release any remaining
pressure in the system.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
ATTENTION
• When disconnecting the supply or high pressure hose, warm
water may leak from the connection after operation.
• Detach the appliance from the water supply.
TRANSPORT
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
• Lift appliance by the carrying handle and carry it.
• Pull out the transport handle until it audibly snaps into place.
• Pull the appliance by its transport handle.
When transporting in vehicles
• Prior to horizontal transport: close the cap of clean detergent bottle.
• Secure the appliance against shifting and tipping over.
16