Before First Use - Westinghouse WFVCR290BK Manual De Instrucciones

BATTERY
Battery charging
After switching off the power switch of the vacuum cleaner, you can connect the
power adapter to power supply and insert the other end into the charging interface
of the vacuum cleaner.
1. In case of low power, the red light of button [Start/Suspend] will flicker.
2. In the charging process, the green light of button [Start/Suspend] will flicker.
3. Once the battery is fully charged, the green light of button [Start/Suspend] will
be on constantly.
4. When the product is charged for first time, please ensure charging it for 6
hours at least.
5. When the product is turned on and charged, if you remove the power adapter,
the "Start/Suspend" light will flicker in red and green alternatively to remind
you that the power switch is not turned off. If you do not use the machine,
please turn off the power switch.
6. Please charge the machine fully after you finish using it every time.
7. In order to protect the battery, please charge it every 2 months when the
machine is not in use for a long time.

BEFORE FIRST USE

1. Carefully take the device and its accessories out of the packaging. Retain
the packaging in case you would like to store the device away or transport it
at a later date. If you choose to dispose of the packaging, then please do so
according to the applicable legal regulations.
2. Check the packaging contents for completeness and damages. Should the
contents in the packaging not be complete or be damaged, do not use the
device. Return it to your retail outlet immediately.
3. Clean the device and all accessories before the first use. Refer to the chapter
CARE AND MAINTENANCE.
Preparing your cleaning area
1. Avoid anything wet.
2. Before using this device, pick up objects like clothing, loose papers, pull cords
for blinds or curtains, power cords, and any fragile objects. If the device passes
over a power cord and drags it, there is a chance an object could tumble off a
table or shelf.
3. This product may not be able to stride the vertical step about 8 mm high.
USING THE ROBOTIC VACUUM CLEANER
Operation
START/SUSPEND
1. Switch on power and press [Start/Suspend] key on the remote control or the
button "Start/Suspend" of the machine. EN
5