SafeWaze OSHA 1910 Manual Del Usuario página 14

The SafeWaze Cable Horizontal Lifeline is designed for spans up to 100 ft. in length.
However, any span over 60 ft. requires the use of an Intermediate Anchorage as well
as an additional energy absorber which is installed on the opposite end of the HLL.
The Intermediate Anchorage point can vary insofar as components used, as the
setup / installation method determines what type of Intermediate Anchorage is
required. The user should note that if an intermediate anchorage is utilized, Fall
Clearance is determined based upon the distance from the end anchorage to the
intermediate anchorage.
Figures 10 A and 10 B indicate some examples of Intermediate Anchorages that may
be used with the Cable HLL system as well as the addtional energy absorber.
A
B
FIGURE 10 - INTERMEDIATE ANCHORAGE
80'
40'
80'
40'
Intermediate
Anchorage
Overhead I-Beam Installation With
Beam Anchors Part# 019-4009
and
Intermediate Anchorage Part# 019-4007
V1.4 2019 Copyright SafeWaze
Intermediate
Anchorage
40'
42" Stanchion Installation
with Intermediate Anchorage
Part# 019-8038
Part# 019-8046
40'
User Manual
or
Page 13