Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Check valve Installation
Hold on check valve with your hands, align
the box gap, put in the check valve , and then
spin to a certain angle until three angles of
the valve are stuck. Installation is complete.
Carbon Filter
Activated carbon filter can be used to
trap odors.Normally the activated carbon
filter should be changed at three or six
months according to your cooking
habit.The installation procedure of
activated carbon filter is as below.
- Slide the drawer assembly of cooker hood.
- In order to install the activated carbon
filter, the metallic anti-grease filter
should be detached first.press the lock
and pull it downward.
- Put the activated carbon filter into the
unit it in anti- clockwise direction .Repeat
the same on the other side.Put back the
grease filter in position.
When activated carbon filter attached,the
suction power will be lowered.
Venting knob position
Extraction-air mode:
Turn the venting knob here
means venting outside
Circulating-air mode:
Turn the venting knob here
means recirculation
V.4
Publicidad
Tabla de contenido
