Getting Started - Toshiba CAMILEO P100 Guia De Inicio Rapido

Getting Started

The battery comes pre-installed in the camcorder, however you must
remove the protective film on the battery before use.
To properly connect the battery:
1 Slide the back battery cover down and remove.
2 Remove the battery.
3 Pull the film off.
REMOVE
4 Reinsert the battery, making sure it is lined-up with the correct
polarity marks.
5 Reinstall the battery cover.
To insert the SD™ Card (optional):
1 Flip open the SD™ Card cover.
2 Insert the SD™ Card into the slot until it locks in place.
Li-ion battery
Getting Started
5