Genesis GAG445SE Manual Del Operario página 6

• Before using the tool on an actual workpiece, let it run for a while
vibration or wobbling that could indicate poor installation or a poorly balanced wheel.
• Use the specified surface of the wheel to perform the grinding.
or upper surfaces for cutting.
• Watch out for flying sparks.
flammable materials.
• Do not leave the tool running.
• Do not touch the workpiece immediately after operation;
and could burn your skin.
• ALWAYS wear proper apparel
skin from contact with hot grindings.
• Use appropriate respiratory protection.
wood could expose user to containing hazardous substances.
WArNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
4-1/2" Angle Grinder
Operator's Manual
Hold the tool so that sparks fly away from you and other persons or
Operate the tool only when hand-held.
including long sleeve shirts, leather gloves and shop aprons to protect
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
use of this tool to grind or sand some products, paints and
GAG445SE
. Watch for
Never use the side
it may be extremely hot