Installation
STEP 4 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
• If the rear side of the refrigerator is not level, place a solid object on the lower side and
fix it with tape to level.
• When you push the product into the final installation location, be careful not to damage
the floor.
28
English
Untitled-3 28
If the refrigerator is not installed on a flat
floor, the doors may not be aligned.
• Levelling legs are located on the
left and right side under the bottom
compartment door.
1. Fully open the bottom compartment
door, and then use a Phillips screwdriver
to remove the two screws on each of the
levelling leg cover.
2020-11-12
4:05:56