Malfunction Display And Solutions; Precautions - EAS ELECTRIC EMTD8HP Manual

Malfunction display and solutions

Malfunction display and solutions
Dispiay
Reason
Container is full
"Full" LED on
permanently
Water pump failure or water
level sensor failure
Temperature sensor failure
Child Lock + 9h
Humidity sensor failure
Child Lock + 6h
Child Lock + 3h
Heater failure
(Only MDS80-C05/B05)
V.1
Solutions
Empty container
P lease contact your
local service center
if the problem
persists
18

Precautions

Precautions
Only authorised technicans can carry out repairs.
Before you call customer service, please check if you have deal with the fault by yourself
or if you have follow the user instructions.
A technician will charge you for advice, even during the warranty period.
Problem
•The mains plug is inserted.
•Working state LED
•Check the programme selected.
not on
•Check fuse in the house.
•Empty condensation container.
•
"Full" LED on permanently
•If failure, check hose for condensation outlet.
•Check the
•Check the the door has closed.
•Dryer does not start
•Check the programme has set.
•Align dryer horizontally.
•Water is running out
•Clear air condenser and door seals.
•Press door until it "clicks"into position.
•Door is open by itself
•Check the clothes is over load .
•Ventilate room adequately.
•Humidity in the room is
•Clean the cool grille.
increase significantly
•Ensure that the air condenser has been inserted.
•Clean lint filter and wash condenser.
•Empty container.
•Degree of dryness was not •Check water outlet.
reached or drying time too •Dryer installation too restricted.
long •Clean the moisture sensors.
•Use next higher drying programme or using Timer
programme.
If you can not deal with the faulty by yourself and need help:
1.Press the button 【 】.
On/Off
2.Pull out the mains plug and call the service.
Solution
start button has selected .
V.1
19