Facom Y.107CPB Manual Del Usuario página 10

EngLIsh
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Riveting Nut Assembly (Fig. A–E)
1. Insert the appropriate sized tie rod
2. Thread the bushing 6 over the tie tod
3. Thread the threaded bushing
bushing 6 . Ensure its fully tightened before using.
4. Thread the appropriate sized threaded nut
the assembly.
5. The rivet nut pliers 1 are now ready to use.
OPERATION

CAUTION: Wear safety glasses and gloves
during operation.
Proper Hand Position (Fig. F)

WARNING: To avoid risk of serious injury, ensure both
hands are on the handle grips during operation.
Proper hand position requires both hands on the handle
grips 2 .
Rivet Nut Size Reference Chart
nut
MAtERIAL
M4
Aluminum X
Steel
X
Stainless Steel X
Rivet Nut Application (Fig. A, F–K)
1. Select correct rivet nut size for your application.
2. Ensure the tie rod 5 matches the size of the rivet nut
are operating with.
3. Drill a hole that matches the rivet thickness through the
materials you intend to rivet.
4. Thread the appropriate sized rivet nut
5. Insert the rivet nut
8 into the hole
ensure the rivet nut 8
in Fig. G.
6. Ensure the rivet nut pliers
workpiece as shown in Fig. K.
7. With the handles 2 in the open postion, squeeze the
handles together to the closed position to install the rivet
nut 8 to the workpiece as shown in Fig. F, H, I.
8. Remove the rivet nut pliers
rotating the install knob
9. The rivet nut is ready for you to install the threaded
component of your choice.
8
5 into the rivet nut plier
5
4 over the tie rod 5 and
7 onto
RIVET NUT SIZE
M5 M6
X X
X X
X
8 onto the assembly.
9 of the workpiece and
is flush with the workpiece as shown
1 are perpendicular with the
1 from the workpiece by
3 counterclockwise.
MAINTENANCE
Your FACOM hand tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
C
1 .
Lubrication
Your tool requires no additional lubrication.
D
Cleaning

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories

WARNING: Since accessories, other than those offered
by FACOM, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only FACOM recommended
accessories should be used with this product.
Consult your dealer for further information on the
M8
appropriate accessories.
X
X
8 you