PROZIS ViBE Manual Del Usuario página 6

EN
PAIRING
Note: The left and right soundpods are paired by default.
Pairing with smartphone
• As soon as you take them out of the charging case, the soundpods will switch on
automatically and the right sounpod (main) will search for a BT connection. The
LED indicator light will flash red/green automatically.
• Turn on the BT settings on your smartphone and wait until Prozis Vibe appears in
the list of BT devices found.
• Select Prozis Vibe and wait until the soundpods are listed as connected in the BT
settings of your smartphone.
10
Bluetooth
L R ProzisVibe NC100
Pairing with a computer or other devices
• You should use a BT adapter if your computer does not support a BT connection.
• Plug the BT adapter into the computer's USB port and make sure the BT function
of the adapter is activated.
• Make sure the soundpods are off before initiating pairing mode. As soon as you
take them out of the charging case, the soundpods will switch on automatically
and the right sounpod (main) will search for a BT connection. The LED indicator
light will flash red/green automatically.
• Open the BT software installed in your computer and select
(check the BT software user manual if needed) and wait until Prozis Vibe appears
in the list of BT devices found.
• Select Prozis Vibe and wait until the soundpods are listed as connected in your
computer's BT settings.
• Switch on the media player to play music, watch TV or movies, or play games.
Clearing the paired device list stored in the soundpods
• Take both soundpods out of the charging case and then place them back inside
the case. A red LED indicator light will switch on.
• Press and hold down both soundpod multi-function buttons for 10 seconds. The
red LED indicator light will flicker for 3 times.
• The soundpods will clear the paired device list stored.
EN
Search for BT devices
11