Unit Description; Unit Installation - Kripsol KLX Serie Manual Del Usuario

2019
From
3 g salt/l
Water treatment system and controller for swimming pools.
Water treatment: Chlorine is produced by electrolysis of salt water, using salt water of low salinity. Production of
sodium hypochlorite (liquid chlorine) in the electrolysis cell is achieved with a minimum of 3g salt per litre. The chlorine
combats and eliminates bacteria, viruses and pathogenic agents, and oxidizes organic matter present in the water. The
used sodium hypochlorite reconverts into salt after a few hours. The system centralises control of all pool equipment,
optimising interactions between the various installations.
254 mm
ELECTRONIC BOX
Page 3 of 12
OWNER'S MANUAL
Upgrade Worldwide
possible remote control

1. UNIT DESCRIPTION

A Main connection 230 V - 50 Hz
298 mm
A
Cell connection
B
B
Options connections
C
C
pH and Rx connection
D
D
ON/OFF switch
E
133 mm
Weight: 5.8 kg

2. UNIT INSTALLATION

A
Filtration pump timer*
B
Silex / glass / diatom filter
C
Recirculation pump
1
Electronic box
2
Electrolysis cell (always vertical)
3
pH probe (optional)
4
Rx probe (optional)
5
Temperature probe (optional)
6
WiFi module (optional)
7
Acid dosing pump (optional)
8
Acid injector (optional)
9
Hydrochloric acid container (not supplied)
USE ONLY GENUINE REPLACEMENT PARTS
WiFi and
MODBUS
CELL
KLX
Self-cleaning Sea water
Electrolysis cell
A
Connection to unit
B
Cell housing
C
Flow/gas detector (internal)
D
Electricity consumption
Use of a 25 A time delay circuit breaker is recommended
for KLX devices. Where the power supply is shared with
other devices, please consult a technician for correct
sizing of your installation.
Maximum
Product
Consumption
KLX 8 80 W
KLX 16 130 W
KLX 22 145 W
KLX 33 165 W
KLX 50 210 W
* Filtration control by external timer
Filtration mode:
"Manual / ON"
* Filtration control by internal timer
Filtration mode:
See section on Filtration
EN
g Cl 2 /h
8
16
22
33
50
Rev. B