Worx WG604 Manual Del Usuario página 10

Attach the garden hose
Connect one end of the home
garden hose (not supplied) to
the adapter and another end
to waterspout.
OPERATION
Extension cord
It is not recommended
to use the extension
cord. If necessary, ensure
the plug and extension cord
connection is on an elevated
surface that does not contact
the water area.
GFCI plug test
Press "test" , the light will be
out.
Press "reset" , the power
regains and the light will
illuminate.
Note: To keep good
operation of GFCI, please
implement it once a
month.
START/STOP
Turn on the water supply tap.
Connect the washer to the
10
power supply and turn the
switch to "ON/I "position.
Then press trigger
Note: Before pressing
trigger, make sure Lock-
off switch is in "unlock"
position.
WARNING: Do not
start the machine
without connecting
and turning on the water
supply because it may
cause damage to high
pressure seals and reduce
the service life of pump.
Release the trigger and turn
the switch to "OFF/II"position.
Turn Off the water supply tap
Note: When not in use,
make sure Lock-off switch
is in "lock" position.
13A Electric Pressure Washer
Select the right nozzles
Choose a suitable nozzle
pattern according to your
See Fig. D
work.
Nozzle 0
(yellow) are applicable for
cleaning stubborn stain on
concrete.
Nozzle 25
for cleaning on concrete,
bricks and masonry.
Nozzle 40
for cleaning on wooden and
See Fig. E
other soft objects .
The soap nozzle is applicable
for soaping while other
nozzles cannot be used to
do it.
Turbo nozzle is applicable for
cleaning on concrete, bricks
and masonry.
See Fig.F
tool is powered on.
Cleaning
Begin with the nozzle 1-2ft
away from the surface
and approach with caution
until it reaches the desired
position for overly close
spray may do harm to
surface.
that are dirty, rusty,
muddy, or corrosive.
(Including window
cleaning liquids, plant
foods, or fertilizers etc.)
See Fig. G1,G2
Add and use detergent
Unscrew the Soap tank cap
and add appropriate detergent
.Then screw the Soap tank
Knob.
Install the soap nozzle .
Turn soap adjusting knob left
and right to decrease and
increase the dosage.
Note: If necessary, use
a funnel (not supplied)
to prevent accidental
overflows of detergent
outside of the tank.
See Fig.H1,H2
Use the Hose Reel
To unwind the hose ,turn Hose
Reel Handle clockwise.
To wind the hose, turn
Hose Reel Handle counter
clockwise.
Note: pull the Hose Reel
Handle out and uncoil hose
from the hose reel before
use.
(red) and Nozzle 15
0 0
(green) is applicable
0
(white) is applicable
0
WARNING: Do not
change the nozzle
pattern when the
WARNING: Do not
connect the machine
to water supplies
See Fig.I
See Fig.J
See Fig.K1,K2,K3
See Fig.L
EN