Multi Display; Display Protection - Sharp MULTEOS M40 Manual Del Usuario

OSM RESET

MULTI DISPLAY

MONITOR ID
IR CONTROL
NORMAL
PRIMARY
SECONDARY
LOCK
TILE MATRIX
H MONITORS
V MONITORS
POSITION
TILE COMP
ENABLE
POWER ON DELAY
MULTI DISPLAY RESET
DISPLAY POWER SAVE
PROTECTION
STANDBY MODE
HEAT STATUS
FAN CONTROL
SCREEN SAVER
GAMMA
BRIGHTNESS
MOTION
SIDE BORDER COLOR
AUTO BRIGHTNESS
INPUT DVI, VGA, RGB/HV only
CHANGE SECURITY
PASSWORD
SECURITY LOCK

DISPLAY PROTECTION

RESET
ADVANCED INPUT DETECT
OPTION
except TV input
NONE
*: The product you purchased may not have this feature.
01_English
Resets the following settings within the OSM menu back to factory setting:
OSM TURN OFF, OSM POSITION, INFORMATION OSM, OSM TRANSPARENCY.
Sets the monitor ID number from 1-26.
Selects the mode of the monitor for use with the infra-red remote control when using the
RS-232C daisy chain.
The monitor will be controlled normally by wireless remote controller.
Choose "PRIMARY" for the first monitor within an RS232-C daisy chain.
Choose "SECONDARY" for all subsequent monitors within an RS232-C daisy chain.
Prevents the monitor from being controlled by wireless remote controller. To return to normal
operation, press the "DISPLAY" button on the remote controller for 5 seconds.
Allows one image to be expanded and displayed over multiple screens (up to 25) through a
distribution amplifier.
Number of monitors arranged horizontally.
Number of monitors arranged vertically.
Select which section of the tiled image to be displayed on the monitor.
Turns the TILE COMP feature on.
Enables Tile Matrix.
Adjusts the delay time between being in "standby" mode and entering "power on" mode.
"POWER ON DELAY" can be set between 0 and 50 seconds.
Resets the following settings within the MULTI DISPLAY menu back to factory setting:
MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.
Sets how long the monitor waits to go into power save mode after a lost signal.
Lowers power consumption.
Note: RS232-C Function is lost when in Eco Standby mode.
Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE.
Cooling fan reduces the temperature of the display.
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
The display gamma is changed and fixed when "ON" is selected.
The brightness is decreased when "ON" is selected.
The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT)
at user determined intervals.
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
Adjusts the brightness level according to the input signal.
Allows the security password to be changed.
The factory preset password is 0000.
Locks the security password.
Resets the following settings within the Picture menu back to factory setting:
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER
COLOR, AUTO BRIGHTNESS.
Selects the method of input detection the monitor uses when more than two input devices
are connected.
The Monitor will not search the other video input ports.
27
English-27
18/12/06, 8:52 AM