Publicidad
Idiomas disponibles
Idiomas disponibles
8. Initial use
Place the container on the motor unit. Set the "Speed regulator" to position "0".
Then connect the power plug of the appliance into a properly installed power sock-
et.
Make sure that the container is placed correctly (seen from front: Handle to the
right). Now open the top of the blender jar and put in the required ingredients.
Do not use dry ingredients and ensure that there is enough liquid
in the blender jar. Add liquid (eg water) if necessary.
Select the desired operating program or the desired speed. Move the "ON / OFF"
switch to "ON" positon. The blender will then start to chop the chosen ingredients
into smaller pieces. Adhere to the prescribed operating time. Do not exceed the
blending time under any circumstances.
Pressing the "PULSE" button makes the blender run at maximum speed.
After completing the blending process, please remove the blending jar from the
base unit and disconnect the plug from the socket.
Note: The appliance is designed only for brief periods of operation. Allow the
appliance to cool down for approx. 2 or 3 minutes of continuous operation before
you reuse it!
9. Cleaning and Care
Unplug the power cord from the mains outlet. Clean the base unit with a slightly
dampened soft cloth. Caution! Do not use liquids to clean the base unit and
the power connections. Do not use any aggressive, strong or abrasive cleaning
agents. You can clean the blender jar, the lid and the blade unit in soapy water.
The blender jar and the lid can also be cleaned in a dishwasher. To clean the
appliance quickly and immediately after use, fill the blender jar with warm water
up to about 60%, add some detergent and let the appliance run briefly. Then, take
the blender jar and shake it. Finally, rinse only the blender jar and the blade unit
using clean water until all residue and traces of the detergent are removed. Allow
all parts of the appliance to dry completely!
26
English
Publicidad
