Component List; Technical Data - Worx WX801L Manual De Instrucciones

COMPONENT LIST

1. ON / OFF SWITCH
2. HAND GRIP AREA
3. BATTERY PACK *
4. BATTERY PACK RELEASE BUTTON*
5. SPINDLE LOCK BUTTON
6. SPINDLE
7. WHEEL GUARD FOR GRINDING
8. WHEEL GUARD FOR CUTTING
9. METAL CUTTING DISC
10. CLAMPING BOLT WITH WASHER
11. HEX KEY
12. ABRASIVE CUTTING DISC
13. GRINDING DISC
*Not all the accessories illustrated or
described are included in standard
delivery.

TECHNICAL DATA

12
WX801L WX801L.9 (80 -
Type
designation of machinery, representative
of Mini Cutter)
Rated voltage
Rated speed
Spindle thread
Thickness of metal
cutting disc
Thickness of
abrasive cutting
disc
Thickness of
grinding disc
Disc size
Disc bore
Machine weight
**Voltage measured without workload.
Initial battery voltage reaches maximum
of 20 volts. Nominal voltage is 18 volts.
Cordless Mini Cutter
WX801L WX801L.9
20V Max**
19500rpm
M6
3/64"~1/16"
1/16"
5/32"
3"
3/8"
2.4Ibs 1.5Ibs
ACCESSORIES
Metal cutting discs
Abrasive cutting
disc
Grinding disc
Hex key
Charger (WA3742)
Battery Pack
(WA3520)
Only use the appropriate accessories
intended for this tool. Accessory
information can be found on the product
packaging, at a WORX dealer or on our
website at www.worx.com
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for cutting, roughing
and brushing metal and stone materials
without using water. For cutting metal, a
special protection guard for cutting (accessory)
must be used.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Removing the Battery Pack
Charging the Battery Pack
ASSEMBLY
WX801L WX801L.9
2 2
1 1
1 1
1 1
1 /
1 /
FIGURE
See Fig. A1
See Fig. A2
EN