Mangar Health ELK Manual Del Usuario página 5

Simple solutions for everyday independence
• Replace the stability bar and refit the end cap
(fig. 8).
8
Connecting the 4-way Hand Control and
Airflo
• Connect the four distribution hoses (C fig.9)
from the 4-Way Hand Control to the four
connectors on the ELK (fig.9 inset). The ends of
the hoses are colour coded and numbered to
C
match the corresponding ELK connectors (No.
4 is the top compartment; No.1 the bottom).
• Position the Airflo compressor at the side of the
D
ELK ensuring that it will not be in the way while
lifting and supporting the patient.
• Connect the hose (D fig. 9) from the 4-Way Hand
Control to the air outlet socket on the Airflo
compressor and SELECT THE 'AUTO' FUNCTION
ON THE AIRFLO COMPRESSOR. TO ACTIVATE
THE 'AUTO' FUNCTION, PRESS AND HOLD THE
9
'AUTO' BUTTON UNTIL IT'S L.E.D. LIGHTS UP
(see separate - Airflo instructions).
ELK
5