Getting To Know Your Juice Extractor; How To Use; Getting Started - Juiceman The Big Apple Manual Del Usuario

GETTING TO KNOW YOUR JUICE EXTRACTOR









† . Small food pusher
(Part # JM0S-0)
† . Large food pusher
(Part # JM0S-0)
. Feed chute
. Feed chute hatch
† . Lid (Part # JM0S-0)
† 6. Stainless steel filter
(Part # JM0S-0)
† 7. Juice bowl (Part # JM0S-0)
8. Pulp spout
9. Pulp opening
† 0. Pulp container (Part # JM0S-0)
. Speed control













† . Cleaning brush (Part # JM0S-09)
. Base
† . Juice pitcher (Part # JM0S-06)
† . Juice pitcher lid
(Part # JM0S-07)
6. Juice spout
7. Safety lock button
8. Lid locking lever
† 9. Feed chute hatch release cover
(Part # JM0S-08)
0. Maximum (max) feed chute fill line
. Built-in cord storage (under base)
Note: † indicates consumer replaceable/
removable parts

How to Use

This product is for household use only.

GETTING STARTED

• Remove all packing material and, if applicable, any stickers from the product.
Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty. For
additional information and recipes for your product, go to www.juiceman.com.
• Take the appliance apart following instructions in DISASSEMBLING YOUR
JUICE EXTRACTOR and wash all removable parts as instructed in CARE
AND CLEANING. This will remove any traces of dust or residue left from
manufacturing and shipping.
Important: Do not rinse or immerse base in water or any other liquid.
• Place base on a dry, level counter to prepare and assemble, following
instructions in ASSEMBLING YOUR JUICE EXTRACTOR.
• Once assembled place the appliance on a level dry space, allowing air space on
all sides to provide proper ventilation for the motor.
ASSEMBLING YOUR JUICE EXTRACTOR
Important: Always make sure your juice extractor is unplugged before
assembly.
1. Place juice bowl over base with juice spout facing
the lid locking lever (B).
B
2. With both hands, hold the filter by the rim and
center it over drive shaft inside the juice bowl.
Carefully lower filter into the juice bowl; press
down firmly on the rim to secure (C).
Important: The cutting blades at the bottom of the
filter are extremely sharp! Always hold and carry the
filter by the rim.
Note: When assembled properly, the filter will spin
freely in the juice bowl. To check that it is assembled
properly, simply try spinning the filter by the rim.
C